CS
CS Q-LEAP™ - Next step calibration systems
CS Q-LEAP™ SINE with SE-20
CS Q-LEAP™ SINE with SE-20
The CS Q-LEAP™ system is used for vibration calibration of a wide range of sensors including vibration sensors and measurement systems. It is based on the HERO™ vibration controller and the SE-20 high-frequency vibration exciter.
chevron_right
CS Q-LEAP™ GYRO with DRE-01
CS Q-LEAP™ GYRO with DRE-01
CS Q-LEAP™ calibration system with DRE-01 rotation exciter, HERO™ vibration control system, zero position controller, power amplifier and software. This system is used for the calibration of angular velocity sensors and measurement systems. Typical test items include gyro transducers (angular velocity), inertial measurement units (IMU) and rotation rate measuring systems.
chevron_right
CS Q-LEAP™ SINE with SE-29
CS Q-LEAP™ SINE with SE-29
The CS Q-LEAP™ system is used for vibration calibration of a wide range of sensors including vibration sensors and measurement systems. It is based on the HERO™ vibration controller and the SE-29 high-frequency vibration exciter.
chevron_right
CS Q-LEAP™ SINE with SE-09
CS Q-LEAP™ SINE with SE-09
The CS Q-LEAP™ system is based on the HERO™ vibration controller and the SE-09 high frequency exciter. It allows calibration of a wide range of vibration transducers and vibration calibrators.
chevron_right
CS Q-LEAP™ P-SINE with SE-09
CS Q-LEAP™ P-SINE with SE-09
The CS Q-LEAP™ system is used for primary vibration calibration of a wide range of sensors including vibration sensors and measurement systems. It is based on the HERO™ vibration controller and the SE-09 high-frequency vibration exciter.
chevron_right
CS Q-LEAP™ SINE with SE-13
CS Q-LEAP™ SINE with SE-13
The CS Q-LEAP™ system is based on the HERO™ vibration controller and the SE-13 air-bearing electrodynamic vibration exciter. It is used for seismic simulation and high-accuracy secondary calibration of seismometers and geophones.
chevron_right
CS Q-LEAP™ P-SINE with SE-13
CS Q-LEAP™ P-SINE with SE-13
CS Q-LEAP™ system is based on the HERO™ vibration controller, the laser vibrometer and the SE-13 air-bearing electrodynamic vibration exciter. For primary and secondary calibration at low frequencies, e.g. for seismometers and geophones.
chevron_right
CS Q-LEAP™ SINE with APS 129
CS Q-LEAP™ SINE with APS 129
The CS Q-LEAP™ system is based on the HERO™ vibration controller and the APS 129 air bearing vibration exciter. It allows calibration of heavy seismic sensors (seismometers) as well as geophones.
chevron_right
CS Q-LEAP™ SHOCK with SE-201
CS Q-LEAP™ SHOCK with SE-201
The CS Q-LEAP™ system is based on the HERO™ vibration controller and the SE-201 shock exciter. It enables secondary calibration of shock-sensors as well as complete measuring instruments with very high precision and efficiency, according to ISO 16063-22 and ISO 17025.
chevron_right
CS Q-LEAP™ SHOCK with SE-221
CS Q-LEAP™ SHOCK with SE-221
The CS Q-LEAP™ system is based on the HERO™ vibration controller and the SE-221 shock exciter. It enables secondary calibration of shock sensors as well as complete measuring instruments with very high precision and efficiency, according to ISO 16063-22 and ISO 17025.
chevron_right
CS Q-LEAP™ P-SHOCK with SE-201
CS Q-LEAP™ P-SHOCK with SE-201
The CS Q-LEAP™ system is based on the HERO™ vibration controller and the SE-201 shock exciter. It enables primary and secondary calibration of shock-sensors as well as complete measuring instruments with very high precision and efficiency, according to ISO 16063 - 13, ISO 16063-22 and ISO 17025.
chevron_right
This section provides an overview of the product group Calibration Solutions, which covers both complete SPEKTRA calibration systems and our calibration services. Here, you will find answers to general questions about the topic Calibrating but also an insight into SPEKTRA specific solutions around the calibration system, the associated exciters as well as help to find the right solution for you. Matching adapters, cables and other accessories, some of them developed in-house, complement our portfolio.
Our range of measurands:
ACCELERATION
Calibration systems for amplitude-frequency response and displacement (sine) as well as comparison of peak amplitudes (shock).
Devices under test: Accelerometers, Seismic Sensors, Geophones, Vibration Calibrators, Measuring Equipment, Analyzers, Laser-Vibrometer, ...
ACOUSTICS
Calibration Systems for free-field and pressure chamber
Devices under test: Sound Level Meters, Microphones, Acoustical calibrators, Pistonphones, Analyzers, Surface Microphones ...