DT
S-TEST Lab VHF
The S-TEST Lab VHF system for sensor characterization in very high frequency is based on the SE-16 vibration exciter, which has been specially developed for high frequency excitation of small components and sensors both in the longitudinal and transverse direction.
- Frequency range: 5 kHz...100 kHz (200 kHz)
- Acceleration up to 400 m/s²
- Displacement: 8 /0,01 mm
- Sample rate 120/200 kS/s
- Mounting in different orientation to direction of movement
Software highlights
- Wide range of functions for R&D
- Sweep, Dwell, manual mode, script operation and remote control
- Distortion factor measurement
- Supports laser vibrometer and scanning laser vibrometer
- Spectral RMS measurement
- Blind flight option and manual control to provide lowest vibration levels
- Seamless sample recording
S-TEST/2
S-TEST/2
S-TEST/2 - Compact test system for digital sensors
Compact system level test solution (SLT) for sensors with digital interfaces. For use in development and testing or for quality assurance in the manufacturing process.
chevron_right
VCS 40x
VCS 40x
Flexibly configurable components, based on the powerful PXI system from National Instruments®. Drive of our exciters, from very low to very high frequencies: 10 mHz...500 kHz. Versatile applications allow very fast and effective production tests.
chevron_right
SE-16
SE-16
Rugged vibration exciter that has been specially developed for high frequency excitation of small components and sensors both in the longitudinal and transverse direction. Devices Under Test (DUT) can be glued to the top or sides of the technical ceramic armature in any orientation to the main vibration axis.
chevron_right
Similar Products:
S-TEST Lab AHF
S-TEST Lab AHF
Based on our high-frequency exciters SE-09 and SE-11, the S-TEST Lab AHF systems are a perfect fit for calibration and characterization of MEMS, digital sensors and other small components. Those typical systems were especially designed for system testing at high frequencies.
chevron_right
S-TEST Lab AMF
S-TEST Lab AMF
The S-TEST Lab AMF systems are based on the SPEKTRA vibration exciters such as the SE-10 or the SE-14, which have been especially developed for the excitation of DUTs and sensors in the medium frequency range.
chevron_right
S-TEST Lab ALF
S-TEST Lab ALF
The S-TEST Lab ALF systems can be setup with a wide range of low-frequency acceleration exciters. These shakers are available with an air bearing design for very precise motion or with robust ball bearing design for harsh testing conditions.
chevron_right