DT
S-TEST Lab AMF
The S-TEST Lab AMF systems are based on the SPEKTRA vibration exciters such as the SE-10 or the SE-14, which have been especially developed for the excitation of DUTs and sensors in the medium frequency range.
- Frequency range:
- SE-10: 3 Hz…10 kHz
- SE-14: 0 Hz…8 kHz
- SE-101 RES-HA: 65 Hz…500 Hz
- Max. force 100 N
- Max. payload 2 kg
- Sample rate 20/120 kS/s
- 24 Bit resolution
Software highlights
- Wide range of functions for R&D
- Sweep, dwell, manual mode, script operation and remote control
- Spectral analysis
- Distortion factor measurement
- Multi-channel sensor calibration
- Seamless sample recording
- Result database
- Extensive display functions
- Powerful filters
SE-14
SE-14
Spring-guided vibration exciter that is suitable for daily use in the calibration laboratory as well as for vibration tests.
chevron_right
APS 145
APS 145
800 VA power amplifier for low-frequency vibration exciters
chevron_right
SE-101 RES-HA
SE-101 RES-HA
The exciter is deliberately operated in a certain resonance to cost-effectively generate harmonic acceleration-time signals with very high acceleration amplitudes with a compact 100 N drive. Main applications: amplitude linearity tests of sensors, vibration testing at high accelerations
chevron_right
VCS 40x
VCS 40x
Flexibly configurable components, based on the powerful PXI system from National Instruments®. Drive of our exciters, from very low to very high frequencies: 10 mHz...500 kHz. Versatile applications allow very fast and effective production tests.
chevron_right
S-TEST/2
S-TEST/2
S-TEST/2 - Compact test system for digital sensors
Compact system level test solution (SLT) for sensors with digital interfaces. For use in development and testing or for quality assurance in the manufacturing process.
chevron_right
Similar Products:
S-TEST Lab ALF
S-TEST Lab ALF
The S-TEST Lab ALF systems can be setup with a wide range of low-frequency acceleration exciters. These shakers are available with an air bearing design for very precise motion or with robust ball bearing design for harsh testing conditions.
chevron_right
S-TEST Lab VHF
S-TEST Lab VHF
The S-TEST Lab VHF system for sensor characterization in very high frequency is based on the SE-16 vibration exciter, which has been specially developed for high frequency excitation of small components and sensors both in the longitudinal and transverse direction.
chevron_right
S-TEST Lab AHF
S-TEST Lab AHF
Based on our high-frequency exciters SE-09 and SE-11, the S-TEST Lab AHF systems are a perfect fit for calibration and characterization of MEMS, digital sensors and other small components. Those typical systems were especially designed for system testing at high frequencies.
chevron_right