CS
Accessorie Case Standard
Assortment of standard accessories for calibration work of vibration sensors in the laboratory. The set includes suitable tools, adapters and necessary auxiliary material for careful and effective sensor calibration.
Downloads:
Accessories for the mechanical mounting of sensors
- set of allen keys (1× imperial; 1× metric)
- special adapter set for PR sensors e.g. Endevco 7264
- torque wrench
- nuts for torque wrench (9⁄32”; 1/2”; 3/4”; 1-3/16”; 16 mm; 17 mm; 22 mm)
- adjustable wrench
- adapter plate with a variety of mounting adapters and test threads
- slot screwdrivers
Accessories for the electrical connection of sensors
- adapters for BNC, TNC and Microdot
- sensor cables 3 m (1× BNC – Microdot, 1× TNC – Microdot, 1× Microdot – Microdot)
Additional tools
- knife
- acetone (glass bottle)
- duct tape
- loctite 401 super glue
- gluing wax
- vaseline (small jar)
- insulation tape
- sandpaper
- folding rule
- pens (1× permanent, 1× non-permanent)
- self-adhesive cable clips
For detailed information see current data sheet. Subject to change without notice.
Similar Products:
TRANS
TRANS
TRANS for CS18 VLF (primary and secondary)
Used for hardware and software to determine the cross-sensitivity of sensors
chevron_right
PR-Measurement
PR-Measurement
Signal conditioners and software for PR-sensors
PR signal conditioner power supply of piezo-resistive (bridge), variable capacitance and similar sensors used with the CS18 calibration system
chevron_right
SUPPLY internal
SUPPLY internal
Provides proper connection of several kinds of sensors to a voltage input of a measurement device (here: CS18 VCU). Sensor is plugged in at input. Signal output is connected to CS18 VCU input. Provides DC supply voltage(s) for sensor and performs signal preconditioning.
chevron_right
Laser vibrometers
Laser vibrometers
Calibration of laser vibrometers
Optical components and software for calibration according to ISO 16063-41
chevron_right