CS
ATS-15
Part of electrical final test and calibration bench for high-precision provision of smallest voltages. Typical users are DAkkS calibration laboratories or National Metrology Institutes (NMI).
Downloads:
- division ratio: 1:1, 1:8, 1:64, 1:512
frequency range: 0...100 kHz
accuracy up to 0.015 % - amplifier: 4:1
frequency range: 0...20 kHz
accuracy up to 0.01 % - operating voltage: 230 VAC / 115 VAC
- power consumption: 10 W
- working temperature: 23°C (± 2 K)
- output resistance: ≤120 mΩ
- remote and manual control
For further details, please refer to the technical data sheet. Subject to change without notice.
Similar Products:
TRANS
TRANS
TRANS for CS18 VLF (primary and secondary)
Used for hardware and software to determine the cross-sensitivity of sensors
chevron_right
SUPPLY internal
SUPPLY internal
Provides proper connection of several kinds of sensors to a voltage input of a measurement device (here: CS18 VCU). Sensor is plugged in at input. Signal output is connected to CS18 VCU input. Provides DC supply voltage(s) for sensor and performs signal preconditioning.
chevron_right
PR-Measurement
PR-Measurement
Signal conditioners and software for PR-sensors
PR signal conditioner power supply of piezo-resistive (bridge), variable capacitance and similar sensors used with the CS18 calibration system
chevron_right
Laser vibrometers
Laser vibrometers
Calibration of laser vibrometers
Optical components and software for calibration according to ISO 16063-41
chevron_right