CS
SE-21
Powerful high-frequency vibration exciter as part of the SE-2X series with cube-shaped ceramic armature for excitation of all DUT axes. With its electrodynamic drive system, the SE-21 offers a very wide frequency range with low transverse motions. A high payload, simple operation in a climatic chamber (as SE-21T) and the many extensions enable the SE-21 to be used as a multi-tool for testing, characterizing and calibrating vibration sensors or smaller electronic devices.
Downloads:
Selected data
- acceleration, max. (sine-peak): 390 m/s2
- force rating, max. (sine-peak): 95 N
- frequency range: 3 Hz...50 kHz (with optional internal reference standard)
- transverse motion typical < 5 %
- displacement, max. (peak-peak): 10 mm
- temperature range: -20 °C…+80 °C resp. -40 °C…+120 °C as SE-21T
- payload, max.: 2 kg vertical / 1 kg horizontal
Features
- cubic armature made from technical ceramics for variable DUT coupling
- first axial resonance > 52 kHz
(> 51 kHz for SE-21T) - easy operation in climate chambers
- efficient electrodynamic drive
- optional internal reference accelerometer
- no compressed air supply or zero position controller required
- optional trunnion for vertical and horizontal mode
Applications
- vibration tests in different directions to the excitation axis
- calibration of vibration sensors according to ISO 16063-21
- vibration tests of small-scale devices
- device testing and sensor characterization
- education and training
Temperature option
- temperature monitoring, active cooling
- SE-21T with extended temperature range and therefore more possible applications
- operation in climate chamber
For further details, please refer to the technical data sheet. Subject to change without notice.
SE-2x Trunnion Base
SE-2x Trunnion Base
Allows the vibration axis of the exciter (SE-20, SE-21 and SE-29) to be tilted and locked at any angle between 0° and 90° from the vertical axis.
chevron_right
PA 500 DM
PA 500 DM
For all vibration exciters that require a 500 VA power amplifier (load impedance 4 Ω). The PA 500 DM offers a max. frequency range DC...200 kHz, small harmonic distortion, excellent stability even with temperature or supply line variations and helpful protection functions.
chevron_right
Similar Products:
SE-09
SE-09
The air-bearing SE-09 high-frequency vibration exciter is a high-tech product developed especially for the high demands of calibration laboratories and metrology institutes as well as for characterization of MEMS sensors.
chevron_right
SE-13
SE-13
Air-bearing electrodynamic Vibration Exciter with mounting table for high payloads up to 50 kg. Especially developed for seismic simulation of components,
primary and secondary calibration as well as testing of big and heavy low frequency seismic sensors or geophones.
chevron_right
SE-101 RES-HA
SE-101 RES-HA
The exciter is deliberately operated in a certain resonance to cost-effectively generate harmonic acceleration-time signals with very high acceleration amplitudes with a compact 100 N drive. Main applications: amplitude linearity tests of sensors, vibration testing at high accelerations
chevron_right
APS 113-AB
APS 113-AB
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter, especially developed for the calibration and testing for low frequency sensors and sensor charcterization.
chevron_right