Products Services

DE

Skip navigation

Contact
Support
Career

What are you looking for, how can we help you?

Keywords

Skip navigation

Products
Applications
Services
Company

Products
Applications
Services
Company
- DE
- Products
- Services
Skip navigation

Keywords

SPEKTRA
Services
Service finder
Search Results

Search results

Filter Products

Article Number

Producer:

Type:

Measurand:

Dut Type:

Acoustic calibration of noise dosimeters

Article Number: MK-P-ND

Acoustical calibration of noise dosimeters in a sound pressure chamber Calibration of the sound exposure Including conformity check according to DIN EN 61252: 2018

Certificate options:

DAkkS-akkreditierte Kalibrierung

Factory Calibration

Calibration range:

-1

Pressure chamber calibration one working point

Brüel & Kjaer

4443

1

Calibration of microphone

Article Number: M-P-1

Calibration of microphone according DIN EN 61672-3 calibration: sound level and frequency (incl. Pre-amlifier)

Certificate options:

DAkkS-akkreditierte Kalibrierung

Factory Calibration

Calibration range:

-1

Pressure chamber calibration one working point

-2

Pressure chamber calibration two working points

-FF

Acoustic calibration of the frequency response in free field at 23 fixed frequencies in one third octave steps (sound pressure level approx. 84 dB) in a frequency range of 125 Hz to 20 kHz with up to 3 frequency weightings (A, C and LIN), including pressure chamber calibration at the reference point (1,000 Hz / 94 dB)

More options:

-ZE

Additional label including the key information of the calibration certificate like sensitivity at the reference frequency.

-EF(SPL-MM)

Extended calibration in the pressure chamber in the frequency range from 31.5 Hz to 125 Hz

-KONF95

Conformity test according to DIN EN ISO 14253-1: 2018: Checking conformity of the determined parameters with the manufacturer's specifications. *** In addition to the conformity assessment according to the criteria of DIN EN ISO 14253-1: 2018, we also offer a conformity assessment without taking measurement uncertainties into account. For this type of conformity assessment, we need a written confirmation from you.

-KONF50

Conformity test without consideration of the measurement uncertainties: Checking the conformity of the determined parameters with the manufacturer's specifications. *** For this type of conformity assessment, in case of a DAkkS-accredited calibration, we need a written confirmation from you. In case of a factory calibration this confirmation is not required.

-TEDS

Update of the integrated electronic data sheet of TEDS transducers (sensors / microphones)

ACO Pacific Inc.

7052

1

Calibration of sound level calibrator (one working point)

Article Number: K-P-1

Calibration at one working point sound pressure level and frequency

Certificate options:

DAkkS-akkreditierte Kalibrierung

Factory Calibration

More options:

-ZE

Additional label including the key information of the calibration certificate like sensitivity at the reference frequency.

-KONF95

Conformity test according to DIN EN ISO 14253-1: 2018: Checking conformity of the determined parameters with the manufacturer's specifications. *** In addition to the conformity assessment according to the criteria of DIN EN ISO 14253-1: 2018, we also offer a conformity assessment without taking measurement uncertainties into account. For this type of conformity assessment, we need a written confirmation from you.

-KONF50

Conformity test without consideration of the measurement uncertainties: Checking the conformity of the determined parameters with the manufacturer's specifications. *** For this type of conformity assessment, in case of a DAkkS-accredited calibration, we need a written confirmation from you. In case of a factory calibration this confirmation is not required.

Brüel & Kjaer

4220

1

Calibration of vibration sensor, bi-axis

Article Number: S-A-2

Calibration of transfer coefficient (sensitivity) with sine excitation at fixed frequencies in one of the standard frequency ranges yet in the maximum standard range of the sensor preferably in octave steps

Certificate options:

DAkkS-akkreditierte Kalibrierung

Factory Calibration

Calibration range:

LF

Low frequency range 0.4 Hz to 160 Hz (up to 900 g)

MF

Medium frequency range 5 Hz to 5 kHz (up to 500 g)

HF

High frequency range 0.2 km² to 2 km/s² (up to 200 g)

-EF(M)

Calibration in extended frequency range 0.4 Hz to 5 kHz (per sensor axis)

-EF(L)

Calibration in extended frequency range 0.1 Hz to 0.4 Hz (per Sensor-Axis)

-F

Logging of amplitude frequency response as continuity test with fine stepping of the frequency (Sweep, starting at 10 Hz) (per Sensor-Axis)

-11

Standard working points

-31

Standard working points

-x

Additional working point

More options:

-PH

Determination of phase response (per Sensor-Axis)

-Q

Determination of cross sensitivity (per sensor axis)

-KONF95

Conformity test according to DIN EN ISO 14253-1: 2018: Checking conformity of the determined parameters with the manufacturer's specifications. *** In addition to the conformity assessment according to the criteria of DIN EN ISO 14253-1: 2018, we also offer a conformity assessment without taking measurement uncertainties into account. For this type of conformity assessment, we need a written confirmation from you.

-KONF50

Conformity test without consideration of the measurement uncertainties: Checking the conformity of the determined parameters with the manufacturer's specifications. *** For this type of conformity assessment, in case of a DAkkS-accredited calibration, we need a written confirmation from you. In case of a factory calibration this confirmation is not required.

-ZE

Additional label including the key information of the calibration certificate like sensitivity at the reference frequency.

-TEDS

Update of the integrated electronic data sheet of TEDS transducers (sensors / microphones)

Brüel & Kjaer Vibro

AS-247

1

Calibration of vibration sensor, single axis

Article Number: S-A-1

Calibration of transfer coefficient (sensitivity) with sine excitation at fixed frequencies in one of the standard frequency ranges yet in the maximum standard range of the sensor preferably in octave steps

Certificate options:

DAkkS-akkreditierte Kalibrierung

Factory Calibration

Calibration range:

LF

Low frequency range 0.4 Hz to 160 Hz (up to 900 g)

MF

Medium frequency range 5 Hz to 5 kHz (up to 500 g)

HF

High frequency range 0.2 km² to 2 km/s² (up to 200 g)

-EF(M)

Calibration in extended frequency range 0.4 Hz to 5 kHz (per sensor axis)

-EF(L)

Calibration in extended frequency range 0.1 Hz to 0.4 Hz (per Sensor-Axis)

-F

Logging of amplitude frequency response as continuity test with fine stepping of the frequency (Sweep, starting at 10 Hz) (per Sensor-Axis)

-11

Standard working points

-31

Standard working points

-x

Additional working point

More options:

-PH

Determination of phase response (per Sensor-Axis)

-Q

Determination of cross sensitivity (per sensor axis)

-KONF95

Conformity test according to DIN EN ISO 14253-1: 2018: Checking conformity of the determined parameters with the manufacturer's specifications. *** In addition to the conformity assessment according to the criteria of DIN EN ISO 14253-1: 2018, we also offer a conformity assessment without taking measurement uncertainties into account. For this type of conformity assessment, we need a written confirmation from you.

-KONF50

Conformity test without consideration of the measurement uncertainties: Checking the conformity of the determined parameters with the manufacturer's specifications. *** For this type of conformity assessment, in case of a DAkkS-accredited calibration, we need a written confirmation from you. In case of a factory calibration this confirmation is not required.

-ZE

Additional label including the key information of the calibration certificate like sensitivity at the reference frequency.

-TEDS

Update of the integrated electronic data sheet of TEDS transducers (sensors / microphones)

AEG

4401/T60

1

+1

You have saved the service on your wishlist.

You may send multiple requests for quotation from your wishlist in one mailing. Please give it a try!

-1

You have removed the service from your wishlist.

Skip navigation

Cloud login
Downloads
CAMPUS

Spektra

Skip navigation
Products
Applications
Services
Company

Information

Skip navigation
Contact
News
Events
Downloads

Legal Notices

Skip navigation
Legal
Privacy Notice
Imprint
Sitemap

COPYRIGHT © SPEKTRA SCHWINGUNGSTECHNIK UND AKUSTIK GMBH DRESDEN