DT
Exciters & Components
SE-20
SE-20
Innovative spring-guided vibration exciter with leading technology as part of the SE-2X exciter series. The SE-20 offers a very wide frequency range, low transverse motion, wide temperature range and high payload. In addition to top quality components, the focus is on a versatile range of application and easy implementation in existing test environments.
chevron_right
SE-21
SE-21
Powerful high-frequency vibration exciter as part of the SE-2X series with cube-shaped ceramic armature for excitation of all DUT axes. With its electrodynamic drive system, the SE-21 offers a very wide frequency range with low transverse motions. A high payload, simple operation in a climatic chamber (as SE-21T) and the many extensions enable the SE-21 to be used as a multi-tool for testing, characterizing and calibrating vibration sensors or smaller electronic devices.
chevron_right
SE-29
SE-29
Innovative high frequency vibration exciter with efficient electrodynamic drive as part of the SE-2X exciter series. The SE-29 offers a very wide frequency range and low transverse motion. Thanks to the wide temperature range and the high payload, the SE-29 is optimally suited for larger sensors or geophones. Besides high quality components, the focus lays on a versatile field of application and easy implementation into existing test environments.
chevron_right
SE-09
SE-09
The air-bearing SE-09 high-frequency vibration exciter is a high-tech product developed especially for the high demands of calibration laboratories and metrology institutes as well as for characterization of MEMS sensors.
chevron_right
SE-13
SE-13
Air-bearing electrodynamic Vibration Exciter with mounting table for high payloads up to 50 kg. Especially developed for seismic simulation of components,
primary and secondary calibration as well as testing of big and heavy low frequency seismic sensors or geophones.
chevron_right
APS 113-AB
APS 113-AB
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter, especially developed for the calibration and testing for low frequency sensors and sensor charcterization.
chevron_right
APS 129
APS 129
Air-bearing ELECTRO-SEIS® Long Stroke Vibration Exciter with mounting table for high payloads up to 23 kg. Especially developed for the calibration and testing of big and heavy low frequency sensors as well as for sensor characterization (e.g. geophones or heavy seismic sensors).
chevron_right
APS 500
APS 500
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter with mounting table for payloads up to 3 kg. Especially developed for the calibration and testing of compact low frequency sensors and for sensor characterization at higher acceleration.
chevron_right
APS 600
APS 600
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter with mounting table for very high payloads. Especially developed for the calibration and testing of geophones and heavy seismic sensors.
chevron_right
APS 113
APS 113
Ball-bearing ELECTRO-SEIS® Long-Stroke vibration exciter specifically designed to be used alone or in arrays for modal excitation of complex structures, particularly when low frequencies are required. Different operating modes with reaction masses, fixing points or auxiliary table kits multiply the application possibilities.
chevron_right
APS 400
APS 400
ELECTRO-SEIS® Long-Stroke vibration exciter with 445 N max. force that is suitable for excitation of large structures such as ceilings or bridges.
chevron_right
APS 420
APS 420
The strongest ELECTRO-SEIS® Long-Stroke vibration exciter to date is used for vibration tests of airplanes and other large structures. With a maximum force of 900 N and up to 150 mm stroke the shaker unlocks a new performance level.
chevron_right
SE-16
SE-16
Rugged vibration exciter that has been specially developed for high frequency excitation of small components and sensors both in the longitudinal and transverse direction. Devices Under Test (DUT) can be glued to the top or sides of the technical ceramic armature in any orientation to the main vibration axis.
chevron_right
SE-14
SE-14
Spring-guided vibration exciter that is suitable for daily use in the calibration laboratory as well as for vibration tests.
chevron_right
SPEKTRA exciter systems cover a wide spectrum of physical stimuli, like translation, rotation, magnet field or pressure to enable stimulated testing and calibration of a large variety of different sensors. Besides a standard-compliant calibration of sensor devices these exciter sytems are also used in complete system level test setups that include stimulus and sensor system testing.
Matching adapters, cables and other accessories, some of them developed in-house, complement our portfolio.
You may also be interested in
System solutions
The S-TEST Lab systems from SPEKTRA offer solutions for system testing on a wide range of sensor types. The perfect combination of software and hardware is crucial here. We will find the right system for your application.
Measuring systems and interface cards
The flexibility of the S-TEST system is achieved by powerful test electronics. The available measurement cards allow easy parallelization and enable high data throughput.
Software
We provide product and test developers with a flexible software framework that enables fast development and adaptation of sensor system level tests.
Amplifiers
We have a selection of power amplifiers that offer protective functions suited to the respective exciter. They can be operated in voltage or current mode.
Options and accessories
The performance range of our systems can be extended at any time with optional components. It is thus possible to adapt a standard system to individual requirements at low cost.
Adapters and cables
For sensor calibration and other vibration-engineering applications, SPEKTRA offers a wide range of accessories for mechanical and electrical adaptation.